CJ2 seeria mini pneumaatiline silinder pakub õhukest ja kerget konstruktsiooni, mis sobib ideaalselt kompaktsetesse ruumidesse. Roostevabast terasest tünn ja sujuv kolvi liikumine tagavad täpse lineaarse liikumise väikesemahulise automatiseerimise jaoks. Sobib ideaalselt kasutamiseks elektroonikaseadmete montaažis, robootikas ja kergete tööstuslike masinate puhul, kus ruumi on vähe.
| Puur (mm) | 6 | 10 | 16 |
| Töötav keskkond | Air | ||
| Liikumise muster | Kahepoolne toiming / ühekordne toiming Ekstrusioonitüüp / ühekordne toiming sisse tõmmatav tüüp | ||
| Tagatud survekindlus | 1.05Mpa (10.5kgf/cm2) | ||
| Maksimaalne rõhk | 0.7Mpa (7.1kgf / cm2) | ||
| Min.surve | 0.25Mpa (2.5kgf/cm2) | 0.15Mpa (1.5kgf/cm2) | |
| Töötemperatuuri vahemik | -10~+70℃ | ||
| Töökiiruse vahemik | 50~750mm/s | ||
| Puhverdamine | Mõlemal pool kummist puhver (standard) | ||
| Löögimarginaal viga (mm) | +1.0 0 mm |
||
| Sadama suurus | M5×0.8 | ||
| Bore(mm) | A | B | C | D | F | GA | GB | H | MM | NA | NB | NDh8 | NN | S | T | Z |
| 6 | 15 | 12 | 14 | 3 | 8 | 14.5 | – | 28 | M3×0.5 | 16 | 7 | 6 | M6×1.0 | 49 | 3 | 77 |
| 10 | 15 | 12 | 14 | 4 | 8 | 8 | 5 | 28 | M4×0.7 | 12.5 | 9.5 | 8 | M8×1.0 | 46 | – | 74 |
| 16 | 15 | 18 | 20 | 5 | 8 | 8 | 5 | 28 | M5×0.8 | 12.5 | 9.5 | 10 | M10×1.0 | 47 | – | 75 |
| Bore (mm) |
A | B | C | D | F | GB | H | MM | NA | NB | NB b8 | *S | |||||||
| 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | ||||||||||||
| 6 | 15 | 8 | 19 | 3 | 8 | – | 28 | M3×0.5 | 3 | 7 | 6 0 | 34.5 (39.5) | 43.5 (48.5) | 47.5 (52.5) | 61.5 (66.5) | – | – | – | – |
| 10 | 15 | 12 | 14 | 4 | 8 | 5 | 28 | M4×0.7 | 5.5 | 9.5 | 8 0 | 45.5 | 53 | 65 | 77 | – | – | – | – |
| 16 | 15 | 18 | 20 | 5 | 8 | 5 | 28 | M5×0.8 | 5.5 | 9.5 | 10 0 | 45.5 | 54 | 66 | 78 | 84 | 108 | 126 | 138 |
| Bore (mm) |
*S | *Z | ||||||||||||||
| 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | |
| 6 | 46.5 (51.5) | 55.5 (60.5) | 59.5 (60.5) | 73.5 (78.5) | – | – | – | – | 74.5 (79.5) | 83.5 (88.5) | 87.5 (92.5) | 101.5 (106.5) | – | – | – | – |
| 10 | 48.5 | 56 | 68 | 80 | – | – | – | – | 76.5 | 84 | 96 | 108 | – | – | – | – |
| 16 | 48.5 | 57 | 69 | 81 | 87 | 111 | 129 | 141 | 76.5 | 85 | 97 | 109 | 115 | 139 | 157 | 169 |
| Bore(mm) | A | B | C | D | F | GA | GB | H | MM | NA | NB | NDh8 | NN | S | T | Z |
| 6 | 15 | 12 | 14 | 3 | 8 | 14.5 | – | 28 | M3×0.5 | 16 | 7 | 6 | M6×1.0 | 49 | 3 | 77 |
| 10 | 15 | 12 | 14 | 4 | 8 | 8 | 5 | 28 | M4×0.7 | 12.5 | 9.5 | 8 | M8×1.0 | 46 | – | 74 |
| 16 | 15 | 18 | 20 | 5 | 8 | 8 | 5 | 28 | M5×0.8 | 12.5 | 9.5 | 10 | M10×1.0 | 47 | – | 75 |
| Bore (mm) |
A | B | C | D | F | GB | H | MM | NA | NB | NB b8 | *S | |||||||
| 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | ||||||||||||
| 6 | 15 | 8 | 19 | 3 | 8 | – | 28 | M3×0.5 | 3 | 7 | 6 0 | 34.5 (39.5) | 43.5 (48.5) | 47.5 (52.5) | 61.5 (66.5) | – | – | – | – |
| 10 | 15 | 12 | 14 | 4 | 8 | 5 | 28 | M4×0.7 | 5.5 | 9.5 | 8 0 | 45.5 | 53 | 65 | 77 | – | – | – | – |
| 16 | 15 | 18 | 20 | 5 | 8 | 5 | 28 | M5×0.8 | 5.5 | 9.5 | 10 0 | 45.5 | 54 | 66 | 78 | 84 | 108 | 126 | 138 |
| Bore (mm) |
*S | *Z | ||||||||||||||
| 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | |
| 6 | 46.5 (51.5) | 55.5 (60.5) | 59.5 (60.5) | 73.5 (78.5) | – | – | – | – | 74.5 (79.5) | 83.5 (88.5) | 87.5 (92.5) | 101.5 (106.5) | – | – | – | – |
| 10 | 48.5 | 56 | 68 | 80 | – | – | – | – | 76.5 | 84 | 96 | 108 | – | – | – | – |
| 16 | 48.5 | 57 | 69 | 81 | 87 | 111 | 129 | 141 | 76.5 | 85 | 97 | 109 | 115 | 139 | 157 | 169 |
