# BSPP / G — British Standard Pipe Parallel thread

> Source: https://rodlesspneumatic.com/resource-center/pneumatic-glossary/bspp-g/
> Language: en-US
> Category: Threads & connections

## Definition

British Standard Pipe Parallel thread: Parallel pipe thread commonly identified by G. Sealing normally occurs with an O-ring, washer, or bonded seal, not on the thread flank. Read the applicable product data and technical standard before treating a catalog value as interchangeable.

## Key facts

- **Term:** BSPP / G
- **Full form:** British Standard Pipe Parallel thread
- **Selection effect:** Sealing normally occurs with an O-ring, washer, or bonded seal, not on the thread flank.

## BSPP / G: definition and engineering context

British Standard Pipe Parallel thread. Parallel pipe thread commonly identified by G.

The term belongs to the threads & connections context. Its exact limits can depend on the cited standard, catalog convention, unit system, reference state, and component configuration.

## Why BSPP / G affects pneumatic selection

Sealing normally occurs with an O-ring, washer, or bonded seal, not on the thread flank.

- BSPT / R: Confirm the matching internal thread form, such as Rp or Rc, and seal method.
- Rc: Verify pairing and sealing practice rather than relying on nominal size.
- Tube OD: Metric and inch tube sizes are not interchangeable even when close.
- Push-in fitting: Match tube material, OD, pressure, temperature, and release clearance.

## How to evaluate BSPP / G in a catalog or replacement project

Read the value together with its unit, test basis, operating pressure, temperature, circuit state, and manufacturer definition.

For replacement work, compare the complete datasheet and drawing. A matching abbreviation or nominal size does not by itself prove functional or dimensional interchangeability.

- British Standard Pipe Taper thread: Tapered external pipe thread commonly identified by R.
- Tapered internal pipe thread: BSP-family tapered female thread designation.
- Tube outside diameter: Outside diameter used to size most push-in pneumatic fittings.
- Push-to-connect fitting: Collet-and-seal tube connection installed by pushing prepared tube into the fitting.

## What to verify before selection

- Sealing normally occurs with an O-ring, washer, or bonded seal, not on the thread flank.
- Confirm the matching internal thread form, such as Rp or Rc, and seal method.
- Verify pairing and sealing practice rather than relying on nominal size.
- Metric and inch tube sizes are not interchangeable even when close.

## Common mistakes

- Treating BSPP / G as a universal definition without checking the manufacturer or standard context
- Mixing gauge and absolute values, incompatible units, or different reference conditions in one comparison
- Selecting a component from the term or nominal value alone without checking the complete operating point and drawing

## Frequently asked questions

### What does BSPP / G mean in pneumatics?

British Standard Pipe Parallel thread. Parallel pipe thread commonly identified by G.

### Why does BSPP / G matter when selecting a component?

Sealing normally occurs with an O-ring, washer, or bonded seal, not on the thread flank.

### Can BSPP / G values be compared directly between catalogs?

Only after the unit, reference condition, test method, operating point, and manufacturer definition have been reconciled.

## Technical references

- [ISO 5598:2020](https://www.iso.org/standard/67985.html): Provides the international fluid-power vocabulary used to interpret pneumatic terminology.
- [ASME B1.20.1](https://www.asme.org/codes-standards/find-codes-standards/b1201-pipe-threads-general-purpose-inch): Defines general-purpose inch pipe threads, including NPT thread form and gauging.