Mini pneumatický valec série CJ2 ponúka štíhly a ľahký dizajn ideálny pre kompaktné priestory. Vďaka valcu z nehrdzavejúcej ocele a plynulému pohybu piestu poskytuje presný lineárny pohyb pre malú automatizáciu. Ideálny na použitie pri montáži elektroniky, robotike a ľahkých priemyselných strojoch, kde je obmedzený priestor.
| Otvory (mm) | 6 | 10 | 16 |
| Pracovné médium | Vzduch | ||
| Vzor pohybu | Dvojčinný/jednorazový vytláčací typ/jednorazový vtláčací typ | ||
| Zaistená odolnosť voči tlaku | 1,05 MPa (10,5 kgf/cm2) | ||
| Maximálny tlak | 0,7 MPa (7,1 kgf/cm2) | ||
| Min.tlak | 0,25 MPa (2,5 kgf/cm2) | 0,15 MPa (1,5 kgf/cm2) | |
| Rozsah prevádzkových teplôt | -10~+70℃ | ||
| Rozsah prevádzkových otáčok | 50 ~ 750 mm/s | ||
| Vyrovnávacia pamäť | Obojstranný gumový nárazník (štandard) | ||
| Rozpätie chyby zdvihu (mm) | +1.0 0 mm |
||
| Veľkosť prístavu | M5×0.8 | ||
| Otvor(mm) | A | B | C | D | F | GA | GB | H | MM | NA | NB | NDh8 | NN | S | T | Z |
| 6 | 15 | 12 | 14 | 3 | 8 | 14.5 | - | 28 | M3×0.5 | 16 | 7 | 6 | M6×1.0 | 49 | 3 | 77 |
| 10 | 15 | 12 | 14 | 4 | 8 | 8 | 5 | 28 | M4×0.7 | 12.5 | 9.5 | 8 | M8×1.0 | 46 | - | 74 |
| 16 | 15 | 18 | 20 | 5 | 8 | 8 | 5 | 28 | M5×0.8 | 12.5 | 9.5 | 10 | M10×1.0 | 47 | - | 75 |
| Otvor (mm) |
A | B | C | D | F | GB | H | MM | NA | NB | NB b8 | *S | |||||||
| 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | ||||||||||||
| 6 | 15 | 8 | 19 | 3 | 8 | - | 28 | M3×0.5 | 3 | 7 | 6 0 | 34.5 (39.5) | 43.5 (48.5) | 47.5 (52.5) | 61.5 (66.5) | - | - | - | - |
| 10 | 15 | 12 | 14 | 4 | 8 | 5 | 28 | M4×0.7 | 5.5 | 9.5 | 8 0 | 45.5 | 53 | 65 | 77 | - | - | - | - |
| 16 | 15 | 18 | 20 | 5 | 8 | 5 | 28 | M5×0.8 | 5.5 | 9.5 | 10 0 | 45.5 | 54 | 66 | 78 | 84 | 108 | 126 | 138 |
| Otvor (mm) |
*S | *Z | ||||||||||||||
| 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | |
| 6 | 46.5 (51.5) | 55.5 (60.5) | 59.5 (60.5) | 73.5 (78.5) | - | - | - | - | 74.5 (79.5) | 83.5 (88.5) | 87.5 (92.5) | 101.5 (106.5) | - | - | - | - |
| 10 | 48.5 | 56 | 68 | 80 | - | - | - | - | 76.5 | 84 | 96 | 108 | - | - | - | - |
| 16 | 48.5 | 57 | 69 | 81 | 87 | 111 | 129 | 141 | 76.5 | 85 | 97 | 109 | 115 | 139 | 157 | 169 |
| Otvor(mm) | A | B | C | D | F | GA | GB | H | MM | NA | NB | NDh8 | NN | S | T | Z |
| 6 | 15 | 12 | 14 | 3 | 8 | 14.5 | - | 28 | M3×0.5 | 16 | 7 | 6 | M6×1.0 | 49 | 3 | 77 |
| 10 | 15 | 12 | 14 | 4 | 8 | 8 | 5 | 28 | M4×0.7 | 12.5 | 9.5 | 8 | M8×1.0 | 46 | - | 74 |
| 16 | 15 | 18 | 20 | 5 | 8 | 8 | 5 | 28 | M5×0.8 | 12.5 | 9.5 | 10 | M10×1.0 | 47 | - | 75 |
| Otvor (mm) |
A | B | C | D | F | GB | H | MM | NA | NB | NB b8 | *S | |||||||
| 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | ||||||||||||
| 6 | 15 | 8 | 19 | 3 | 8 | - | 28 | M3×0.5 | 3 | 7 | 6 0 | 34.5 (39.5) | 43.5 (48.5) | 47.5 (52.5) | 61.5 (66.5) | - | - | - | - |
| 10 | 15 | 12 | 14 | 4 | 8 | 5 | 28 | M4×0.7 | 5.5 | 9.5 | 8 0 | 45.5 | 53 | 65 | 77 | - | - | - | - |
| 16 | 15 | 18 | 20 | 5 | 8 | 5 | 28 | M5×0.8 | 5.5 | 9.5 | 10 0 | 45.5 | 54 | 66 | 78 | 84 | 108 | 126 | 138 |
| Otvor (mm) |
*S | *Z | ||||||||||||||
| 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | 5~ 15 | 16~ 30 | 31~ 45 | 46 ~ 60 | 61~ 75 | 76~ 100 | 101~ 125 | 126~ 150 | |
| 6 | 46.5 (51.5) | 55.5 (60.5) | 59.5 (60.5) | 73.5 (78.5) | - | - | - | - | 74.5 (79.5) | 83.5 (88.5) | 87.5 (92.5) | 101.5 (106.5) | - | - | - | - |
| 10 | 48.5 | 56 | 68 | 80 | - | - | - | - | 76.5 | 84 | 96 | 108 | - | - | - | - |
| 16 | 48.5 | 57 | 69 | 81 | 87 | 111 | 129 | 141 | 76.5 | 85 | 97 | 109 | 115 | 139 | 157 | 169 |
