MY1B Serisi Tip Temel Mekanik Mafsallı Kolsuz Silindirler - Kompakt ve Çok Yönlü Doğrusal Hareket

The MY1B series type represents a fundamental category of mechanically jointed rodless cylinders. Its core design focuses on providing linear driving force while achieving significant space savings through its rodless construction. As a “Basic Type,” it typically does not integrate complex internal guidance mechanisms. This makes it highly suitable for a wide array of automation applications that either already incorporate external guiding systems or where the cylinder’s own guidance precision is less critical, with a greater emphasis on leveraging its compact profile and long-stroke capabilities.

Teknik Parametreler

Tip	Seri	Eylem	Delik boyutu (mm)
Temel	MY1B	Çift etkili	10，16，20，25，32，40，50，63，80，100
Kayar yatak	MY1M	Çift etkili	16，20，25，32，40，50，63
Kam takipçisi kılavuzu	MY1C	Çift etkili	16，20，25，32，40，50，63
Doğrusal kılavuz	MY1H	Çift etkili	10，16，20，25，32，40
Doğrusal kılavuz	MY1HT	Çift etkili	50，63

Sıvı: Compressed Air (typically filtered)
Eylem: Çift Etkili
Guidance Type: Basic Type (typically no built-in precision guides; relies on external guidance)
Çalışma Basınç Aralığı: E.g., 0.1 MPa to 0.8 MPa (approx. 1 to 8 bar); refer to product manual for specifics.
Kanıt Basıncı: Usually around 1.5 times the maximum operating pressure (e.g., 1.2 MPa or 1.5 MPa).
Ortam ve Akışkan Sıcaklığı: E.g., -10°C to +60°C (14°F to 140°F) (non-freezing); confirm specific range.
Yağlama: Most models are designed for non-lube operation; follow manufacturer’s recommendations.
Manyetik Anahtar: Standart yapılandırma genellikle çeşitli manyetik anahtar türleri için yerleşik bir mıknatıs içerir.

Performans Parametreleri:

Piston Hızı: Wide range, e.g., 50 to 1000 mm/s (actual speed depends on load, air pressure, piping, and cushion settings).
Yastıklama:
- Standart: Her iki uçta ayarlanabilir hava yastığı.
- Some models or smaller bores may use rubber bumpers.
- For high-speed or high-load applications, use in conjunction with external shock absorbers (e.g., hydraulic shock absorbers) is recommended.
Strok Uzunluk Aralığı:
- Extensive range of standard strokes, from tens of millimeters to several meters (e.g., up to 2000mm, with some bore sizes supporting up to 5000mm via special options).

Yapı ve Montaj:

Mevcut Delik Boyutları: E.g., ø10mm, ø16mm, ø20mm, ø25mm, ø32mm, ø40mm, ø50mm, ø63mm, ø80mm, ø100mm, etc.
Liman Diş Tipleri: Vary with bore size, e.g., M5, G1/8, G1/4, G3/8, G1/2, etc. (or Rc, NPT threads).
Montaj Seçenekleri: The cylinder body itself usually offers multiple mounting interfaces or T-slots, allowing flexible installation with various mounting feet, flanges, and other accessories (e.g., top mount, bottom mount, side mount).

Load & Guidance:

İzin Verilebilir Yük ve Moment: As a basic type cylinder, the MY1B series has limited capacity for its carriage to directly withstand complex offset loads and significant moments. When substantial side loads, offset loads are present, or when high motion accuracy is required, it is essential to use an external linear guidance system. The cylinder primarily provides the axial thrust. The selection of the external guide will determine the overall system’s load capacity and precision.

Başvuru ve Seçim Rehberliği

Due to their space-saving nature and long-stroke capabilities, MY1B series type rodless cylinders are widely used in packaging machinery, material conveying, printing equipment, woodworking machinery, textile machinery, and various automated production lines for pushing, pulling, and positioning tasks.
When selecting, first choose an appropriate bore size based on the required thrust, then determine the stroke.
Critically Important: Based on the actual load conditions in the application (weight, center of gravity, motion acceleration, external forces, etc.), an appropriate external guidance mechanism must be designed and selected.
Evaluate operating speed and load to choose the correct cushioning method; consider adding external shock absorbers at stroke ends or critical positions if necessary.
Consider if position feedback is needed and select suitable magnetic switches and their mounting.