Explore the future of pneumatics. Our blog offers expert insights, technical guides, and industry trends to help you innovate and optimize your automation systems.
Friction force calculation in large bores requires distinguishing between static friction (breakaway) and dynamic friction (motion). Generally, static friction is 20-30% higher than dynamic friction, and accounting for this difference is crucial for accurate sizing and smooth operation.
Boundary lubrication failure occurs when the protective fluid film between the rod and the bearing surface breaks down, allowing direct contact between asperities. This friction generates intense localized heat and abrasion, which is the primary root cause of scoring in cylinder rods.
The physics of seal lip geometry boils down to contact stress management. Sharp edge designs generate high localized pressure to scrape surfaces clean, while radiused (rounded) designs promote a hydrodynamic oil wedge that reduces friction and extends life.
MoS2 coatings provide a permanent, dry lubricating layer that bonds to the metal surface, allowing cylinders to operate millions of cycles without supplemental oil or grease, making them ideal for “clean” industries.
Pneumatic cylinder “bounce” occurs due to air’s compressible nature, where compressed air acts like a spring, storing and releasing energy that causes oscillations when the piston reaches the end of its stroke or encounters resistance, creating a mass-spring-damper system with natural resonant frequencies.
