Mounting stiffness

Cantilever-Mounted Cylinder Deflection Calculator

Estimate elastic deflection and bending stress of a cantilevered cylinder or support member under side load using section diameter and span. Enter the application values to calculate four decision-ready outputs and review the governing assumptions before selecting equipment.

Use calculator All tools

Mounting stiffness

Run the calculation

Engineering visual

Cantilever Cylinder Deflection Calculator calculation path

The rod is shown as a loaded beam or column so unsupported length, diameter, end restraint, side load, and deflection can be read in their physical positions.

01Equivalent support diameter
02Calculate and compare
03Calculated end deflection

Calculated end deflection

Maximum bending stress

Equivalent section inertia

Calculated end slope

Calculation reference

What this tool checks.

Use the displayed relationship to understand how the entered conditions affect the result. Treat the output as a preliminary selection, then verify actual operating conditions, catalog limits, and safety margin.

Inputs

Equivalent support diameter
Cantilever length
End side load
Elastic modulus
Support model

Outputs

Calculated end deflection
Maximum bending stress
Equivalent section inertia
Calculated end slope

Engineering guide

Use the result with the right context.

Calculate cantilever cylinder deflection calculator for a pneumatic application and compare the result with supplier data.

Calculation workflow

Enter Equivalent support diameter, Cantilever length, End side load and replace every default with application data.
Run the calculation while keeping pressure, temperature, geometry, and reference states consistent.
Interpret Calculated end deflection, Maximum bending stress, Equivalent section inertia against the supplier datasheet, machine risk, and an appropriate design margin.

Assumptions and limits

The relationship is a first-pass rigid-body or elastic-member estimate; guides, joints, seals, and structural compliance can change the installed result.
Use pressure available at the actuator and verify mounting, cushioning, duty, speed, and catalog load limits.

How to use the Cantilever Cylinder Deflection Calculator

Start with measured or supplier-confirmed values for Equivalent support diameter, Cantilever length, End side load, Elastic modulus. The calculator updates all outputs together, making it easier to see which assumption controls the preliminary selection.

What the result means

Calculated end deflection, Maximum bending stress, Equivalent section inertia, Calculated end slope answer different parts of the same engineering question. Use the primary result for selection, the secondary values to audit units and margins, and the visible formula to reproduce the calculation in an RFQ worksheet.

Engineering limits

The relationship is a first-pass rigid-body or elastic-member estimate; guides, joints, seals, and structural compliance can change the installed result. Use pressure available at the actuator and verify mounting, cushioning, duty, speed, and catalog load limits. Final approval requires the current manufacturer datasheet and validation under installed conditions.

FAQ

Common review questions.

01Tool noteWhat does the Cantilever Cylinder Deflection Calculator calculate?

Estimate elastic deflection and bending stress of a cantilevered cylinder or support member under side load using section diameter and span. It returns Calculated end deflection, Maximum bending stress, Equivalent section inertia, Calculated end slope so the primary answer and its supporting checks stay together.

02Tool noteCan I use the result as a final component selection?

Use it for preliminary engineering and RFQ comparison. Final selection must include supplier ratings, installation losses, transient conditions, applicable standards, machine risk, and validation testing.

03Tool noteWhy can a supplier calculation differ?

Supplier tools may use proprietary test curves, correction factors, rounding, leakage allowances, or reference conditions. Match those conditions and replace the defaults before comparing results.

04Tool noteWhat should I verify after using the Cantilever Cylinder Deflection Calculator?

Check the entered units and reference conditions, then compare the calculated outputs with manufacturer ratings, application safety margins, transient loads, installation losses, and measured machine performance.