Inputs
- Equivalent support diameter
- Cantilever length
- End side load
- Elastic modulus
- Support model
Mounting stiffness
Estimate elastic deflection and bending stress of a cantilevered cylinder or support member under side load using section diameter and span.
Mounting stiffness
Estimate elastic deflection and bending stress of a cantilevered cylinder or support member under side load using section diameter and span.
Engineering visual
The rod is shown as a loaded beam or column so unsupported length, diameter, end restraint, side load, and deflection can be read in their physical positions.
Calculation reference
Results are preliminary estimates. Actual operating conditions, component ratings, and the required safety margin determine whether a component is suitable.
Engineering guide
Estimate elastic deflection and bending stress of a cantilevered cylinder or support member under side load using section diameter and span.
Enter Equivalent support diameter, Cantilever length, End side load and replace every default with application data.
Run the calculation while keeping pressure, temperature, geometry, and reference states consistent.
Interpret Calculated end deflection, Maximum bending stress, Equivalent section inertia against the supplier datasheet, machine risk, and an appropriate design margin.
The relationship is a first-pass rigid-body or elastic-member estimate; guides, joints, seals, and structural compliance can change the installed result.
Use pressure available at the actuator and verify mounting, cushioning, duty, speed, and catalog load limits.
FAQ