A Technical Guide to Using Proportional Valves for Cylinder Position ControlBuild a closed-loop pneumatic cylinder position system using a 5/3 proportional valve, feedback, safe commissioning, trace-based tuning, and acceptance tests.Blog Tag
cylinder speed and flow articles
Review every Bepto Pneumatic article connected to cylinder speed and flow, grouped as one focused reading list for engineers, maintenance staff, and sourcing specialists.
Tagged Reading Path
All articles tagged cylinder speed and flow
Use this archive to scan related selection notes, RFQ checks, replacement guidance, and pneumatic component references.
A Technical Guide to Using Proportional Valves for Cylinder Position ControlBuild a closed-loop pneumatic cylinder position system using a 5/3 proportional valve, feedback, safe commissioning, trace-based tuning, and acceptance tests.
The Impact of Port Geometry on Cylinder Fill and Exhaust TimesLearn why 2x port area cannot promise 2x flow, and how ISO 6358 conductance, chamber demand, and dynamic pressure tests set cylinder timing.
How Does Air Compressibility Affect Pneumatic Cylinder Control Performance?Learn how air compressibility changes cylinder stiffness, how 10% pressure drop affects response, and when closed-loop pneumatic control is required for motion.
Why Does Cylinder Acceleration Change Dramatically with Different Load Weights?Learn why cylinder acceleration changes with load using the net-force equation, SMC's 50% dynamic load-factor guide, and practical pressure and flow checks.
How Does Choked Flow Physics Limit Your Pneumatic Cylinder’s Maximum Speed and Performance?Learn how choked flow limits pneumatic cylinder speed, use the 0.528 pressure ratio, calculate stroke demand, and diagnose supply or exhaust restrictions.
How Can You Accurately Calculate and Control Dangerous End-of-Stroke Forces in Your Pneumatic Cylinders?Calculate pneumatic cylinder end-of-stroke energy, separate average from peak force, and apply Parker's 50% cushion-entry speed warning in machine design.
Why Are Hydro-Pneumatic Cylinders the Ultimate Solution for Precision Control Applications?Learn how hydro-pneumatic cylinders control feed speed or create a short high-force stroke, plus the sizing, safety, and RFQ checks that matter.
How Do You Properly Derate Pneumatic Cylinders for Reliable High-Altitude Performance?Learn why altitude does not automatically reduce cylinder force, how 6 bar gauge preserves thrust, and which high-altitude air-system checks matter most.
How Do Meter-Out Circuits Deliver Precise Speed Control for Pneumatic Cylinders?Learn how meter-out circuits control pneumatic cylinder speed through exhaust restriction, correct sizing, installation, tuning, and fault diagnosis.