How Can High-Force Pneumatic Actuators Transform Your Pressing and Clamping Operations for Maximum Efficiency?Size high-force pneumatic actuators with 6 bar force data, tandem-cylinder limits, clamp geometry, pressure-loss checks, and machine safety requirements.→Blog Author
Jack Chen
Hello, I'm Jack, a Bepto Pneumatic pneumatics engineer. I help review cylinder sizing, rodless replacement details, stroke, guides, mounting, seals, and load direction.
Author Reading Path
Articles by Jack Chen
179 articles sorted newest first for readers who want one author's pneumatic selection notes in one place.
What’s the Duty Cycle of Linear Actuators?Calculate linear actuator duty cycle using motor on-time, then check pneumatic frequency, speed, load, cushioning, travel, and verified 15 Hz product limits.→
Rotary Actuators: Rack & Pinion vs. Vane Type ExplainedCompare rack-and-pinion and vane rotary actuators using SMC 90-270° options, Parker torque data, load checks, end stops, mounting, and key RFQ criteria.→
An Engineer’s Guide to Sizing Pneumatic Rotary ActuatorsSize pneumatic rotary actuators using torque, inertia, pressure and kinetic energy checks, with a worked 90-degree example and practical valve sizing.→
What Is Side Loading on Linear Actuators and How Can It Destroy Your Equipment?Learn how linear actuator side loading damages rods, seals, and guides, then diagnose it safely in service with 2-position checks and model-specific load data.→
How Does Pneumatic Cylinder Bore Size Affect Air Consumption and Operating Costs?A 50-to-63 mm bore step raises cap-end volume 58.8% at the same stroke and pressure. Calculate cycle air, annual kWh, and operating cost before sizing up.→
The Impact of Cylinder Bore Size on Force and Speed: A Practical GuideSee how cylinder bore size changes force, flow demand, speed, and air use, with worked 32-80 mm comparisons and a practical sizing sequence.→
A Guide to Selecting Cylinders for Vertical Lifting ApplicationsSelect a vertical lifting cylinder using m(g+a), minimum pressure, mounting and load-holding checks; SMC limits one lock family to 50% holding force in use.→
Ensuring Gasket and Seal Compatibility in Pneumatic CylindersUse a 5-gate method to verify pneumatic cylinder seal compatibility across media, temperature, motion, hardware, and testing before approving a replacement.→